Regulatory Requirements for Use

A press brake fitted with LazerGuard or LazerGuard Plus must comply with the relevant local regulations that apply to machine safety and accident prevention. The press brake must also receive any other approvals required by the regulations governing the operation of machinery at the location where the machine is being installed and operated.

LazerGuard and LazerGuard Plus systems do not conform with the requirements of machinery safety standards including but not limited to; EN12622 governing safety of machines in CE territories, ANSI B11.3-2012 in the United States, CSA Z142-10 in Canada and NR12 in Brazil. LazerGuard and LazerGuard Plus systems must not be supplied with or installed on press brakes sold in regulated territories such as those listed above. It is the sole responsibility of the press brake manufacturer to ensure its press brakes meet all and any safety and certification requirements of the territory in which the press brake is sold.


Frequently Asked Questions

OEM embedded LazerGuard systems are tailored to suit each manufacturer and custom integrated into the machine design. Functions, features, set-up and operation of the system will vary from one manufacturer to the next. For user manuals you will need to contact the press brake manufacturer or your machinery dealer for the information specific to your machine make and model.

Software

Restricted

Drawings

Restricted

Certification

Restricted

Engineering Change Publications

Restricted